Examination Centres
Following is the zone wise listing of GATE examination centres.
IISc Bangalore Zone
IIT Bombay Zone
IIT Delhi Zone
IIT Guwahati Zone
IIT Kanpur Zone
IIT Kharagpur Zone
IIT Madras Zone
IIT Roorkee Zone
Have a Question ... Ask Us...
Related Articles from
Entrance Exams
in India
Pattern of Examination
GATE entrance examination is single paper of 3 hours duration and of 150 marks. The question paper is in English only. Before applying for GATE entrance examination, a candidates must assure that he/she has chosen the right optional subject, which enables him/her to become eligible to seek admission to the programme of interest. The criteria for postgraduate admission with scholarship/assistantship are different in various Institutes. GATE Offices are not in a position to provide any information in this regard.
The choice of the paper is the responsibility of the candidate.
Graduate Aptitude Test in Engineering(GATE)
Introduction
GATE - Graduate Aptitude Test in Engineering is an All-India Examination conducted by the Indian Institute of Science (IISc), Bangalore and the seven Indian Institutes of Technology (IIT’s). This test is conducted on behalf of the National Coordinating Board - GATE, Department of Education, Ministry of Human Resources Development (MHRD), Government of India. GATE is a passport for admission into ME and MTech courses in almost all the colleges / institutes / universities of the country. ME / MTech is a three semester programme and admission to these programmes largely depends upon GATE percentile score.
GATE examination
Application
You may apply online by visiting concern institute’s website.
You could also obtain the brochure and application form from the GATE offices of the zone in which you select your test centre on payment of the prescribed amount by demand draft drawn in favour of the concerned institute.
You could also obtain the brochure and application form by post, by sending a request to the Chairman, GATE, at any of the IITs and IISc.
Your request must be accompanied by two self-addressed slips and a demand draft of the specified amount drawn in favour of the concerned Institute.
Note: Applications should be submitted to
Contact Details
GATE-Graduate Aptitude Test in Engineering is conducted in 8 zones by the GATE Examination Committee across the country. The zone wise corresponding institutes are listed here for the benefit of GATE aspirants.
Zone
Contact Address
Telephone/Fax
Indian Institute of Science Bangalore
Chairman, GATE
IIS- Bangalore,
Bangalore 560 012
Phone: 080-22932392
Fax: 080-23601227
Indian Institute of Technology Bombay
Chairman, GATE
IIT- Bombay,
Mumbai 400 076
Phone: 022-25767068
Fax : 022-25723706
Indian Institute of Technology Delhi
Chairman, GATE
IIT- Delhi,
Hauz Khas
New Delhi 110 016
Phone: 011-2659 1749
Fax : 011-2658 1579
Indian Institute of Technology Guwahati
Chairman, GATE
IIT- Guwahati,
Guwahati 781 039
Phone: 0361-2582751
Fax : 0361-2690789
Indian Institute of Technology Kanpur
Chairman, GATE
IIT- Kanpur,
Kanpur 208 016
Phone: 0512-2597412
Fax : 0512-2590932
Indian Institute of Technology Kharagpur
Chairman, GATE
IIT- Kharagpur,
Kharagpur 721 302
Phone:
Syllabus
Graduate Aptitude Test in Engineering (GATE) for admission to M.E. / M.Tech. offered at different locations is fixed by the GATE conducting authority. To know the syllabus in detail of your choice of GATE subject Click ON the subject of your choice.
Agricultural Engineering
Architecture & Planning
Civil Engineering
Chemical Engineering
Computer Science and Engineering
Chemistry
Electronics & Communication Engineering
Electrical Engineering
Geology & Geophysics
Instrumentation Engineering
Mathematics
Mechanical Engineering
Mining Engineering
Metallugical Engineering
Physics
Production & Industrial Engineering
Pharmaceutical Science
Textile Engineering and Fibre Science
Engineering Science
Life Science
Information Technology
Contact
IIT-Bangalore GATE Office Indian Institute of Science-Bangalore
Bangalore -- 560 012 Phone: (080) 22932392 Fax: (080) 23601227
IIT-Mumbai GATE Office Indian Institute of Technology-Bombay
Powai Mumbai -- 400 076 Phone: (022) 2576706
Fax: (022)
25723706
IIT-Delhi GATE Office Indian Institute of Technology-Delhi
Hauz Khas New Delhi -- 110 016 Phone: (011) 2659 1749 Fax: (011)
2658 1579
IIT-Guwahati GATE Office Indian Institute of Technology-Guwahati
Guwahati -- 781 039 Phone: (0361) 2582751 Fax: (0361) 2690789
IIT-Kanpur GATE Office Indian Institute of Technology-Kanpur
Kanpur -- 208 016 Phone: (0512) 2597412 Fax: (0512) 2590932
IIT-Kharagpur GATE Office Indian Institute of Technology-Kharagpur
Kharagpur --
Eligibility
Eligibility for Appearing in GATE
Eligibility criteria for Graduate Aptitude Test in Engineering are -
Bachelor's degree in Engineering/Technology/Architecture/Pharmacy or those who are in the final or pre-final year of such programmes.
Master's degree holders in any branch of Science / Mathematics / Statistics / Computer Applications or equivalent and those who are in the final or pre-final year of such programmes.
Candidates in the second or higher year of the Four-year Integrated Master's degree programme (Post-B.Sc.) in Engineering/Technology or in the third or higher year of Five-year Integrated Master's degree programme and Dual Degree programme in Engineering/Technology.
Candidates with qualifications obtained through examination conducted
Stipend
Candidates who have passed Graduate Aptitude Test in Engineering (GATE) examination will be eligible to get a stipend up to Rs.2,500/- per men sum from University Grants Commission (UGC) depending on the performance in M.E./ M.Tech. Examination.
Common Entrance Examination for Design (CEED) Indian Institute of Technology (IIT)
Common Entrance Examination for Design (CEED) is conducted by Indian Institute of Technology, Bombay, on behalf of the Ministry of Human Resources Development (HRD), Department of Education (DAE), Government of India.
CEED is the qualifying examination for admission to Post Graduate M.Des. (i.e. Master of Design) programmes at the Industrial Design Centre (IIT Bombay), Inter disciplinary Industrial Design Programme (IIT Delhi), Centre for Product Design and Manufacturing (IISc Bangalore) and Design Programme (IIT Kanpur). However, IIT Kanpur and IISc Bangalore also consider GATE (Graduate Aptitude Test in Engineering) score for admission
Test Details
Candidates are required to take Common Admission Test (CAT) which is common to both Post Graduate as well as FPM/Doctoral Programs of all the IIMs.
Alternatively, they can take GATE, GRE and JRF of UGC and CSIR. Candidates who have already obtained a PGDM from any of the IIMs with a minimum CGPA of 6.0 on a 10 point scale or equivalent need not take CAT and can apply directly through the prescribed FPM application form.
Interested candidates are required to rake the Common Admission Test (CAT) of IIMs or GMAT / GRE / GATE / UGC JRF (Research) for some
Examination Centres
Centers of examination for CBSE – AIPMT are listed below:
Examination centres for AIPMT Preliminary Examination :
Itanagar, Agartala, Port Blair, Shillong, Imphal, Panaji, Pondicherry, Guwahati, Trivandrum, Cochin, Bhubaneshwar, Chennai, Patna, Ranchi, Mumbai, Nagpur, Ahmedabad, Shimla, Lucknow, NOIDA, Dehradun, Chandigarh, Delhi, Kolkata, Bangalore, Bhopal, Raipur and Jaipur
Examination centres for AIPMT Final Examination :
Cochin, Bhubaneswar, Chennai, Ranchi, Mumbai, Lucknow, Delhi, Kolkata, Bhopal and Jaipur
Centres for Examination
Centers of examination for admission into MBBS/BDS/BSc courses of Amrita Institute of Medical Sciences are given below:
Kochi, Kozhikode, Thiruvananthapuram, Coimbatore, Chennai, Mumbai, Delhi and Kolkota
Examination Centres
Mumbai
Ahmedabad
Kolkatta
Delhi
Hyderabad
Bangalore
Chennai
Examination Centres
Centres of Examination
Angul
Cuttack
Paralakhemundi
Balasore
Dhenkanal
Phulabani
Bargarh
Jagatsinghpur
Puri
Baripada
Jajpur
Rayagada
Bhawanipatna
Jeypore
Rourkela
Berhampur
Jharsuguda
Sambalpur
Bhadrak
Kendrapara
Sarang
Bhubaneswar
Keonjhar
Sundargarh.
Bolangir
Koaraput
Burla
Nayagarh
Centres for Lateral Entry
Balasore
Berhampur
Bhubaneswar
Cuttack
Rourkela
Sambalpur
Examination Centres
The centre of examination for Combined Engineering Entrance (CEE) is National Capital Territory of Delhi only.
August 22nd, 2008 at 9:27 am
can you send me the syllabus of textile engineering and fiber science for gate exam